U.S. state profile · USGS ComCat
Earthquakes in North Carolina
North Carolina has catalogued 1 M4+ earthquakes since 2005 (ranked 30th of 39 U.S. states), with the strongest reaching magnitude M5.1.
North Carolina ranks 30th of 39 U.S. states and territories by catalogued seismic activity - a state with limited seismic activity, averaging about 0 M4+ events a year alongside 0 significant M6+ earthquakes since 1900. Below: the full M6+ event history, magnitude and depth profile, and yearly trend.
- 1
- M4+ events (since 2005)
- 0
- Major M6+ (since 1900)
- M5.1
- Strongest
- ~0
- M4+ per year
The verdict
North Carolina is relatively quiet seismically compared to most places tracked here, with 1 M4+ earthquakes logged since 2005 and 0 major M6+ events since 1900, the strongest reaching magnitude 5.1.
- N/A
- no yearly breakdown available
- N/A
- average recorded event depth
- 0%
- of events are shallow (<70 km, the most damaging kind)
Average catalogued magnitude is 5.1 - most events are moderate tremors felt but rarely damaging. North Carolina is the quietest tracked jurisdiction; the next step up the ladder is Missouri at 2 M4+ events.
Catalog event strip
Event tape NC · North Carolina M4+ · 30th/39
North Carolina · 1 M4+ · max M5.1 · 0 M6+
- M6 1
- DEPTH 30th/39
- PHOTO M5.1
- BUSY 0
- SHAL near Missouri
- PCT Aug 9, 2020
Stamps derive from this jurisdiction's USGS ComCat row (M4+ book, rank, peak magnitude, M6+ record, ladder neighbour, depth/peak year), not a hazard forecast. PlainQuake is informational only - not professional advice and not a substitute for official USGS guidance. See our disclaimer. Verify with USGS ComCat → · Read with methodology → · How earthquakes are measured → · Most active U.S. regions → · All state catalog rows → · States ranked →
Where North Carolina sits in the catalog
Rank 30th of 39 tracked U.S. states and territories (0th percentile by M4+ count since 2005). North Carolina is the quietest tracked jurisdiction; the next step up the ladder is Missouri at 2 M4+ events.
- Missouri - next more active (2 M4+)
No M6+ events on the significant record
North Carolina has catalogued M4+ activity since 2005 but zero magnitude-6.0-and-above events in the USGS significant series back to 1900. The nearest tracked jurisdiction that does carry an M6+ record is Arizona (7 M4+ · 3 M6+).
Same M4+ count, broken by peak magnitude
10 tracked jurisdictions share North Carolina's exact catalogued count of 1 M4+ events since 2005. Among that cohort, North Carolina ranks 1st of 10 by strongest recorded magnitude (M5.1).
| State | M4+ count | Strongest |
|---|---|---|
| North Carolina (this page) | 1 | M5.1 |
| New Jersey | 1 | M4.8 |
| Maine | 1 | M4.7 |
Seismic hazard context
Catalogued counts on this page are history, not a building-code hazard map. North Carolina's latest M4+ catalog entry is dated Aug 9, 2020. For the national PGA design-basis tiers, see the seismic risk maps guide or the USGS National Seismic Hazard Model.
Other states in this catalog sample
A North Carolina-keyed shuffle of the full 38-state roster (not the six nearest by count), so adjacent quiet states do not share the same comparison set.
Peak-magnitude sample from the same roster
A second North Carolina-keyed shuffle of states with a recorded max magnitude (independent order from the frequency sample above).
According to the US Geological Survey Earthquake Hazards Program, PlainQuake's figures are rendered directly from 317,293 recorded M4+ earthquakes and 14,444 significant M6+ events (USGS ComCat, 2005-present) -- no figure is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these numbers, or report a data error. Data current as of 2026-08-26.